Still power controller: which one to choose and why control heating element power at all
Contents
A still power controller lets you heat up the boiler charge at full power and then drop to the column operating power, at which the column runs calmly and does not flood. The simplest power controller is a knob. A power controller operated from the thermometer app does the same, but adds two things: you change the power from your phone, and the heating elements switch off on their own when the temperature goes above the alarm threshold.
In brief
- Without power control the heating element runs at 100% all the time: good for heating up, bad for take-off.
- The EQUINOX power control module has two independent channels: 2 × 2000 W or 2 × 3500 W, MAX 16 A, on a single-phase or two-phase installation.
- You set the power in the WiFi thermometer app, and on a temperature alarm the heating elements switch off on their own.
- The module alone costs 330 zł (≈ 75 €), the thermometer and module set 700 zł (≈ 159 €).
Why a still heating element needs a power controller
A heating element has one rated power, but the process needs two. At the start you want to bring the boiler charge to the boil as fast as possible, so full power is fine. When the vapour reaches the top of the column, the same power is already too much: the column gets more vapour than it can handle, the packing floods and the temperature jumps.
That is why every sensible run looks the same: heating up at full power, then reducing to the operating level, then steady running. The EQUINOX-RK.10 controller makes this reduction itself, in an automatic cycle. A power controller lets you do it by hand, but conveniently.
How much power you need for heating up and how much for running depends on the boiler, the column diameter and the packing. We have described the ranges and how to choose in a separate article on heating element power for distillation. Here we focus on what to control that power with.
Which still power controller: three types in practice

On the market you will find three solutions. They differ in who decides to change the power and whether the device knows the temperature at all.
| Solution | Who changes the power | Does it know the temperature | What happens on alarm |
|---|---|---|---|
| Knob power controller | You, by hand at the still | no | nothing, the heating element keeps heating |
| Power control module for the WiFi thermometer | You, from the phone app | yes, through the thermometer probes | the heating elements switch off on their own |
| EQUINOX-RK.10 column controller | the controller, according to the process stage | yes, 4 probes (up to 6) | stop and alarm |
A knob power controller is enough when the still is small and you are standing next to it anyway. The module makes sense when you already have the EQUINOX WiFi thermometer and want the same phone on which you see the temperatures to control the heating elements too. A full controller is for those who want a program to run the power, take-off and valves.

How the power control module for the WiFi thermometer works
The module is a power unit with two independently controlled channels with a rated power of 2 × 2000 W or 2 × 3500 W, limited to MAX 16 A. It works on a single-phase or two-phase installation, so you can spread two heating elements across two phases if you have them.
The module itself has no screen or probes of its own. You connect it to the EQUINOX T-4 WiFi thermometer, and from then on the thermometer app shows power sliders next to the temperatures from the four probes. You set the power, switch the heating elements off, watch the graph. All in one place.
The most important function is switching off on alarm. For each T-4 probe you set an over-temperature alarm threshold. When any probe exceeds it, your phone lets you know and the module switches the heating elements off by itself. This safeguard works regardless of whether you happen to be looking at your phone.
Already have the EQUINOX T-4 thermometer? See the power control module for 330 zł (≈ 75 €). Note: the module does not include a thermometer and will not work without one.
Two channels: why a power controller needs two heating elements
Two independent channels give more freedom than one large one. You can heat up on both heating elements and run on one. You can keep one at constant power and adjust the other. On a two-phase installation you spread the load instead of drawing everything from one socket.
Note the current limit: MAX 16 A per channel. A 3500 W heating element at 230 V draws about 15 A, so it is within the limit, but the cable, socket and protection in the distribution board must be ready for it. If you are not sure about your installation, ask an electrician to check the circuit before the first start-up.
SSR or triac: what is inside and does it matter
Electronic power controllers switch the heating element with a semiconductor, not a mechanical contact. They do it either with a triac (the typical component in simple knob controllers) or with a solid-state relay, or SSR. Neither has moving parts, and neither wears out like an ordinary relay. You will find a general description in the encyclopedia entry on solid-state relays.
For you as a user, what matters more is not the component itself but what surrounds it: cooling of the module, current limiting and whether the controller knows when to switch off. The EQUINOX module switches the heating elements off on a temperature alarm, and the EQUINOX-RK.10 controller also protects the heating element control circuit against overload and stops operation if the condenser overheats.
A power controller or a column controller straight away
If you only want to limit the power and you watch the process yourself, a power controller is enough. If you want the process to run repeatably without standing at the column, you need a controller that, in addition to the heating elements, operates solenoid valves and knows the stages of the process. You will find a comparison of both approaches in the distillation controllers category.
The good news: a thermometer with a power control module is not a dead end. You can later expand the same EQUINOX T-4 thermometer with an add-on module to the EQUINOX-RK.10 controller, so the measurement you buy today stays with you.
This article is about equipment and power control, not about producing alcohol. Before you operate a still, check the regulations in your country - in many countries distillation is regulated.
Frequently asked questions
Will a still power controller replace a column controller?
No. A power controller changes the heating element power, but it does not operate solenoid valves and does not know the stages of the process. The EQUINOX-RK.10 controller reduces the power after heating up by itself, opens the valves and detects the tails. A power controller is a convenience, a controller is an automatic system.
Which heating element can I connect to the power control module?
Two heating elements with a rated power of 2000 W or 3500 W each, limited to MAX 16 A per channel. The module works on a single-phase or two-phase installation.
Does the module work without the WiFi thermometer?
No. The module is operated from the EQUINOX thermometer app and will not work without it. If you do not have the thermometer, choose the WiFi thermometer set with power control module for 700 zł (≈ 159 €).
What happens when the temperature exceeds the alarm?
Your phone gets a notification and the module switches the heating elements off. You set the alarm threshold separately for each of the thermometer’s four probes, so you can watch the boiler, the column and the condenser at the same time.
Summary
A still power controller is needed because heating up and running require different power levels. A knob does this most simply, but knows nothing about the temperature. The EQUINOX power control module gives two channels up to 2 × 3500 W, control from the thermometer app and heating elements switched off on alarm. It is a solution from a Polish manufacturer that you can later expand into a full column controller.
Start with measurement and control in one app: the WiFi thermometer set with power control module for 700 zł (≈ 159 €) or, if you already have the thermometer, the module alone for 330 zł (≈ 75 €).
Want to see your column temperature on your phone?
The thermometer shows temperatures on your phone and alerts you when they cross your limit. You can extend it with heater power control or a full column controller.
See EQUINOX equipmentRelated guides
Distillation
The distillation process step by step: how distillation works and answers to common questions
The distillation process step by step: stages, fraction temperatures, heads, hearts and tails, the azeotrope and methanol - answers to common questions.
Distillation
WiFi thermometer upgrade: how to turn a thermometer into a column controller
WiFi thermometer upgrade: the add-on module turns an EQUINOX thermometer into a column controller. What stays, what is added and when the RK.10 is better.
Distillation
Reflux column thermometer: how many sensors and where to fit the probes
Reflux column thermometer: four probes (boiler, buffer, plate, condenser), what each shows, alarms and a pressure sensor with boiling point correction.